Temperature Transducers | LABO T012-I Temperature Transmitter - Complete transmitter in 12 mm housing
- Analog output 4..20 mA (LABO-T012-I)
- Analog output 0..10 V (LABO-T012-U)
- Frequency output (LABO-T012-F)
- The same transmitter for various piping widths
- User-configurable via plug pin (teaching)
- Same mechanical design available, whether temperature switch, flow transmitter / switch or level switch
|
| | PMT50-2/-3 Temperature Transmitter With ATEX Option - Input for standard signals
- Measuring range pragrammable
- Transmitter supply 24 V DC/30 mA
- Linearization or transformation of output characteristics via 32 base-points programmable
- Basic accuracy <0.2 %
- Analog output 0/4 ... 20 mA, 0/2 ... 10 V DC
- Max. 4 Alarm outputs (relay SPDT)
- Full 3-port isolation
- Click here to download the ATEX version datasheet
|
| | MU500 Temperature Transmitter - Input RTD; Pt100 or Pt1000
- Accuracy 0.2%
- 2-or 3-wire connection
- Linearize outputs 0/4 ... 20mA and 0/2 ... 10V DC
- Line resistance max. 500 Ω
- Operating temperature -10º...+60ºC
- Full 3-port isolation
|
| | MU500Ex ATEX Certified Temperature Transmitter - Intrinsically safe input ATEX II (1) G [Ex ia] IIC ATEX II (1) D [Ex iaD]
- Basic accuracy 0.2 % (0.1 % factory calibration for one range available)
- 2- or 3-wire connection
- Current burden max. 1000 Ω
- Start- and End-value adjustable
- Full 3-port isolation
- Supply voltage 10 ... 30 V AC/DC or 85 ... 253 V AC/110 ... 125 V DC
- 22.5 mm case for DIN rail mounting
|
| | MU500L Temperature Transmitter - Input RTD; Pt100 or Pt1000
- Accuracy 0.2%
- 2-or 3-wire connection
- Linearize outputs 0/4 ... 20mA and 0/2 ... 10V DC
- Current burden max. 500 Ω
- Zero-point and measuring span adjustable
- Full 3-port isolation
|
| | TC500 Thermocouple Transmitter - Input front side programmable
- Integrated cold-junction compensation
- Break of sensor Y over temperature
- Output signal switch selectable
- Accuracy 0.15%, ±1°C
- Temperature linearize outputs 0/4 ... 20mA or 0/2 ... 10V DC
- Current burden max. 500 Ω
- Full 3-port isolation
|
| | EVO TRA 4 ÷ 20 Temperature Transducer With Integrated M12 Connection - Full software set up
- Works in environtment from 0 - 100% R.H. and - 40º - 85º C
- Tightness IP67
- High accuracy
- M12 connection integrated
- Stainless steel body
- Also available with integrated mineral insulated bendable RTD probe
|
| | ETSD Temperature Transducer With Swan-Neck -
Simple recording of differential temperature -
Operating temperature from -25degC to +105degC -
Up to 300m between the two sensing elements -
Standard 4 - 20mA output from (rotate-able) Din plug -
Supplied with 2 x M12x1 self assembly connector plugs -
1/4" or 1/2" BSP thread with 28, 30 or 45mm probes |
| | ETS Temperature Transducer With Choice Of Probe Lengths & Swan Neck£245.08 -
Ranges from -40° to +100°C (PT100) -
Up to 250°C with optional swan-neck -
1/2" BSP stainless steel thread -
50mm; 150mm and 200mm probe options -
4 - 20 mA output -
Maximum pressure = 25 bar -
Can also be used with the Omni or Flex systems |
| | Omni-T Temperature Transmitter With 2 x Switch Points£465.92 -
New temperature transducer with 0 - 100degC range -
Increased range of 0 - 250degC with optional swan-neck -
4 - 20mA output with 2 x user adjustable switch-points -
All stainless steel with no moving parts -
Clear & easy to read back-lit LCD display protected to IP 67 -
Simple to adjust with removable setting ring -
For more information on the Omni range - Click here |
| 
