search site

PVL knows a thing or two about temperature control and management and has about the best range of temperature switches in the UK. We can supply temperature switches with brass, aluminium or stainless steel body, with Normally Open or Normally Closed contacts, potted or surface mounting, with or without a magnet to extract ferrous particles, to IP65 if you need it and for a wide range of actuating temperatures. For one-off purchases through to OEM contracts, PVL has the products and the expertise to meet your needs and see you through.

The PVL team is happy to help you with advice on specification and installation and takes care of its customers in a rather old-fashioned way. If in doubt, get on the phone to 01892 664499 and ask us to help.

     If you require Temperature Transducers, then you need our Temperature Transducers Page

If you need Technical Advice, our Engineers are waiting for your call on 01892 664499 or click here to send us your enquiry.

                                         Scroll down now to see our complete range.

& your own copy of THE BIG CAT
 
PLEASE NOTE
In order to view the data sheets, you will need the free Adobe Acrobat Reader

TS & TSP
BRASS BODY N/O or N/C CONTACTS

Temperature switch brass body type TS & TSP
  • Models available from 25°C to 180°C
  • N/O or N/C contacts
  • Brass body
  • 12Vdc/16A or 240Vac/10A
  • Wide choice of threads
  • Optional protective boot


TB & TBM
BRASS BODY WITH OPTIONAL MAGNET

Temperature switch with optional magnet
  • Models available from 31°C to 70°C
  • 3/8" or 1/2" BSP threads
  • Brass body
  • IP 65 when fitted with CAP2
  • N/O or N/C contacts 240Vac/10A res
  • Optional magnet (see illustration)


TBC
ALUMINIUM BODY WITH DIN PLUG

  • Models available from 30°C to 105°C
  • 3/8" or 1/2" BSP threads
  • Aluminium body for maximum heat conductivity
  • N/O or N/C contacts 240Vac/1A res (0.5A ind)
  • 5°C hysteresis (differential)
  • Standard Din plug (IP 65)
NTBC
ALUMINIUM BODY & ROTATABLE DIN PLUG

  • Models available from 30°C to 105°C
  • 3/8" or 1/2" BSP threads
  • Aluminium body for maximum heat conductivity
  • N/O or N/C contacts 240Vac/1A res (0.5A ind)
  • 5°C hysteresis (differential)
  • Standard Din plug rotates through 360 deg


TB-OEM
POTTED CABLE & CONNECTOR PLUG
Temperature switches for OEM's
  • For OEM applications we can supply temperature switches with an integral potted cable and connector of your choice.
  • Minimum order quantities apply - please call our technical department for advice.


NTB & NTBM
ALUMINIUM BODY & OPTIONAL MAGNET

Temperature switch with optional magnet
  • Bi-metalic fixed set-point temperature switches
  • Anodised aluminium body with optional magnet
  • 3/8", 1/2" or M22x1.5 threads
  • Normally Open or Normally Closed contacts
  • 25degC to 105degC ranges (+/- 5degC)
  • Switching differential (hysteresis) 11degC
  • Contacts rated 240Vac/10A (IP 65)
ER100
SURFACE MOUNTING
Surface Mounting Temperature switch type ER100
  • Insulated or earth return
  • Die-cast body
  • Surface mounting with 6.5mm dia hole
  • Trip temperatures = 100; 105; 107 & 120 degC
  • Ideal for engines, pumps & gearbox casings etc.


TF1.KV
STAINLESS STEEL OR BRASS BODY & DIN PLUG
Temperature switch type TF.KV
  • 30 - 100degC range (factory set in 5degC increments)
  • 3/4" BSP thread
  • Maximum pressure 16 bar
  • C/O contacts rated at 220Vac/2A (max)


CO3 & CO8
LOW COST SWITCH & SIMPLE TO ADJUST

Temperature switch type CO3 & CO8
  • Ranges from 0°C to 200°C
  • Locking dial sets switch set-point
  • 1/2" BSP brass thread
  • 250Vac/2.5A (Inductive)
  • SPDT contacts
  • Choice of probe length
TR & TTR
SINGLE OR DOUBLE RANGE OPTION
Temperature switch type TR & TTR
  • Model TR has a 35 - 95degC range (external dial)
  • Model TTR has a 50 - 130degC range plus the
    50 - 130degC range with the internal dial.
  • Both switches can be coupled together.
  • Maximum pressure 16bar
  • 1/2"BSP thread
  • TR = 220Vac/8A(max) TTR = 5A (max)


 
 © 2008 PVL
site design - hyperlinx