search site

The people at PVL understand pressure transducers better than most - we have been supplying them to many of Britain's leading manufacturers for years and helping top engineers to get the specification right first time. The PVL pressure transducer range is extensive and includes everything from budget pressure transducers for OEM applications through to models that can be programmed using infrared.

There are low-cost thick film pressure transducers, with or without digital display in a broad spread of pressure ranges. There are pressure transducers with a swan neck to simplify readout, pressure transmitters in a wide range of specifications including a high temperature version and a depth-pressure model. There's a sludge level transmitter and one for hygienic applications. The range goes on. Scroll down and take a look.

If you need Technical Advice, our Engineers are waiting for your call on 01892 664499 or click here to send a us your enquiry.

                                    Scroll down now to see our complete range.

 
 
PLEASE NOTE
In order to view the data sheets, you will need the free Adobe Acrobat Reader.

PS
LOW COST 'THICK FILM' PRESSURE TRANSDUCER
Low cost pressure transducer
  • 0 - 6; 0 - 10; 0 - 16; 0 - 25; 0 - 40 & 0 - 100 bar ranges
  • 4 - 20mA output
  • All stainless steel wetted parts
  • 11.5 to 30Vdc supply
  • 2 x over-pressure & 0.5% accuracy
  • See optional plug-on display below


GIA
AS ABOVE BUT WITH DIGITAL DISPLAY
Plug-in digital display
  • This digital display fits most transducers/transmitter and takes it power supply from the 24Vdc loop.
  • Ideal for 'pressure' & 'temperature' etc.
  • Fit all 2-wire transducers/transmitters
  • Full 'easy set-up' instructions supplied with each unit


EPS1
PRESSURE TRANSMITTER
Pressure transducer
  • 0.1 to 400 bar ranges (6 x models)
  • 4 - 20mA two wire system
  • Din plug can be rotated for correct orientation
  • Flush diaphragm with all stainless steel wetted parts
  • Maximum temperature 100degC
  • 1% accuracy @ 60degC
  • Can also be used with the Omni or Flex Systems
EPS1..H
PRESSURE TRANSMITTER WITH SWAN-NECK
Pressure transducer with swan-neck
  • Optional swan-neck increases temperature range
  • 4 - 20mA two wire system
  • Din plug can be rotated for correct orientation
  • Flush diaphragm & all stainless steel wetted parts
  • Maximum temperature 125degC
  • 1% accuracy @ 60degC
  • Can also be used with the Omni or Flex Systems


OMNI-P1
NEW! GENERAL PURPOSE TRANSDUCER
New! General purpose transducer
  • New pressure transducer with 8 ranges up to 200 bar
  • 4 - 20mA output with 2 x user adjustable switch-points
  • All stainless steel wetted parts
  • Scratch proof, toughened glass display window
  • Clear & easy to read back-lit LCD display
  • Simple to adjust with removable setting ring
  • For more information on the Omni System - Click here


GS 4000
GENERAL PURPOSE TRANSDUCER
General purpose pressure transducer
  • Pressure ranges from -1 to 700 bar
  • Over-pressures up to 1,400 bar
  • 20mV; 10Vdc and 4 - 20mA outputs
  • All stainless steel wetted parts
  • 1/4" BSP standard connection
  • Din plug standard or cable option
PR 3100
PRESURE TRANSMITTER
Pressure transmitter
  • Vacuum ranges from -1 - 0 bar
  • Pressure ranges from 0 - 500mbar to 0 - 1,000 bar
  • 4 - 20mA standard output
  • All stainless steel wetted parts
  • 1/2" BSP standard connection
  • Din plug standard or cable option


PR 3110
PRESURE TRANSMITTER
Pressure transmitter
  • Vacuum ranges from -1 - 100 mbar & -1 - 200 mbar
  • Outstanding performance & stability
  • 4 - 20mA standard output
  • All stainless steel wetted parts
  • 1/2" BSP standard connection
  • Din plug standard or cable option


PR 3860
HIGH TEMPERATURE PRESSURE TRANSMITTER
High temperature pressure transducer
  • Temperatures up to 300degC
  • Pressure ranges from 0 - 6 bar to 0 400 bar
  • 1/2" BSP thread connection
  • Supply voltages from 13 to 36Vdc
  • Standard 4 - 20mA (2 x wire) output
  • Zero and span adjustable on-site
PR 3440
DEPTH PRESSURE TRANSMITTER (BORE HOLE)
Bore hole pressure transducer
  • Only 22mm diameter allows easy insertion
  • 0 - 5 to 0 - 500 meter ranges
  • Supply voltages from 13 to 36Vdc
  • Standard 4 - 20mA (2 x wire) output
  • Zero and span adjustable on-site


PR 3420
SLUDGE LEVEL TRANSMITTER
Pressure transducer for sludge
  • Ideal for heavily contaminated liquids
  • 0 - 2.5 to 0 - 500 meter ranges
  • High stability & repeatability
  • Supply voltages from 13 to 36Vdc
  • Standard 4 - 20mA (2 x wire) output
  • Zero and span adjustable on-site


PR 3820
HYGIENIC FITTING PRESSURE TRANSMITTER
Pressure transducer for hygienic use
  • Hygienic model for pharmaceuticals, milk & food
  • Tri-clover (Tri-clamp) or RJT process connections
  • 0 - 500 mbar to 0 - 400 bar ranges
  • 1/2" BSP thread connection
  • Supply voltages from 13 to 36Vdc
  • Standard 4 - 20mA (2 x wire) output
  • Zero and span adjustable on-site
PR 9200
HIGH PRESSURE D.P. TRANSMITTER
Differential pressure transducer
  • Designed for high static pressures up to 300 bar
  • 0.12 to 1.2mbar and 0 to 65 bar D.P. ranges
  • Standard 4 - 20mA output
  • 316 grade stainless steel wetted parts
  • 2 x 1/4"NPT process connections
  • Excellent performance with long term accuracy
  • Zero and span adjustable


EDP1
HIGH PRESSURE D.P. TRANSMITTER
Differential pressure transmitter
  • Designed for pressures from 1 to 200 bar
  • Up to 400 bar over-pressure proof
  • Standard 4 - 20mA output
  • All stainless steel wetted parts
  • 2 x 1/8" BSP ports
  • Excellent accuracy of +/- 1% FS
  • M12 plug connection
  • Click here to see the Omni-DP1 option


PR 3202
ULTRA LOW RANGE D.P. TRANSMITTER
Differential pressure transducer
  • 0 - 1 to 0 - 1,000 mbar differential pressure ranges
  • Accurate at very low D.P. (10 pascal)
  • High stability and repeatability
  • 4 - 20mA two-wire output
  • Zero and span adjustment on-site
  • Intrinsically Safe model available

                                                                    Top of page
 © 2008 PVL
site design - hyperlinx