| UR3K Paddle Type With Reed Flow Switch£82.51 -
Reed switch rated at 250Vac/50VA -
Sizes from 3/8" to 2" BSP -
3 to 62 l/min adjustment ranges -
Brass or stainless steel bodies -
Up to 25 bar system pressure -
Temperatures up to 110°C |
|
| UM3K Paddle Type Flow Switch With Microswitch£104.52 -
Microswitch rated at 250Vac/5A -
Sizes from 3/8" to 2" BSP -
3.5 to 76l/min adjustment ranges -
Brass or stainless steel bodies -
Up to 25 bar system pressure -
Temperatures up to 110°C |
|
| 615 & 622 DIY Flow Switch£39.00 -
Models for 15mm or 22mm copper pipe -
Supplied complete with compression fittings & 1m cable -
C/O microswitch rated at 250Vac 16aA (res) 4A (ind) -
Suitable for water applications up to a maximum temperature of 85°C -
See DataFax 2134P for Fitting Instructions -
All wetted parts are WRAS approved |
|
| CM2K Paddle Type Flow Switch£133.81 -
4 x paddles supplied with each switch -
Suitable for pipe sizes from 25mm to 200mm (1" to 8") -
1"BSP threaded pipe fitting -
All stainless steel option -
Easily adjusted by screw under sliding cover -
Standard (IP65) Din plug -
C/O microswitch rated 250Vac/5A |
|
| CRE Flow Switch For Pipes Up To 6" Diameter (150 DN)£127.43 -
Suitable for pipe sizes from 1" to 6" diameter. -
Standard 1" BSP fitting -
0.19 to 39.90 m³/h (H²O) adjustment ranges - 4 x paddle sizes supplied with each switch
-
Brass or stainless steel body -
Protected to IP65 |
|
| CRG Mechanical Flow Switch£127.43 -
Suitable for pipe sizes from 1" to 7.5"" diameter. -
Standard 1" BSP fitting -
0.2 to 90.80 m³/h (H²O) adjustment ranges -
4 x paddle sizes supplied with each switch -
Brass or stainless steel body -
Protected to IP65 |
|
| F26 S&H Corosion Resistant Heavy Duty Flow Switches£139.72 |
|
| F26 SS & HS Heavy Duty Paddle Flow Switch£168.85 -
All polypropylene construction with s/steel thread option. -
Suitable for acids, chemicals & seawater -
Standard 1" BSPT thread -
15A or 20A 500V SPDT switch -
Suits pipe sizes 25mm and above |
|
| F27 Flow Switch with Built In Timer£179.55 -
Dry running protection for pumping systems -
Built-in timer -
Automatic run-on timer -
No metal parts in contact with the liquid -
Suitable for acids, chemicals & seawater |
|
| F30 Corrosion Resistant Pump Controller£168.50 -
Integrated flow and pressure control -
Built-in timer and run-on timer -
Directly controls pumps up to 3.75kW 5HPs -
Suitable for acids, chemicals & seawater -
Dry running protection for pumping systems |
|
| TW25 Trailing Wire Flow Switch - Prices start from £146.10
-
Corrosion resistant body -
Unique, stainless steel trailing cable sensor -
Adjustable flow sensitivity -
Ideal for open channel or piped systems -
Conveyor belt solids detection |
|
| TW26 Heavy Duty Trailing Wire Flow Switch -
Unique, stainless steel trailing cable sensor -
Standard 1" BSPT fitting -
Corrosion resistant body -
Manual override for testing -
Powerful 15Amp 500Volt SPDT switch |
|
| CR20 Series Super Sensitive Chemical Resistant Inline Flow Switch£163.02 -
Detects flows of less than 5ml/min -
Handles flows up to 4l/min -
All wetted parts are UPVC with Viton® O-ring seals -
Suitable for plastic tubing with 6, 8 & 12mm adaptors -
Suitable for acids, chemicals & seawater & gases |
|
| Kelco MF20 Micro Flow Switch - Detects flow of less than 350ml/hour
- Suits tubes & pipes 6 to 20mm (1/4 to 3/4")
- No metal parts are in contact with the liquid
- Choice of three switching flow rates
- 18 bar pressure rating
- Reed switch SPDT
- Glass filled polypropylne body
|
|
| P20 Non Metal Inline Flow Switch£139.00 - Suits tubes and pipes 6 to 20mm (1/4 to 3/4") diameter
- No metal parts are in contact with the liquids
- Suitable for acids, chemicals & seawater
- Choice of three switching flow rates
- 18 bar pressure rating
|
|
| P25 Non Metal Heavy Duty Inline Flow Switch£143.52 -
No metal parts are in contact with the liquids -
Suitable for acids, chemicals & seawater -
Suits tubes and pipes 15 to 25mm (1/2" to 1") diameter -
100l/min flow rating -
Detects very low flows |
