Float Switches

Our level switches for pump control have been designed for a direct connection to low power pumps or to high power pumps by using a relay. The microswitch inside the level switch tilts when the liquid level rises in pumping stations, tanks or in any other application where the float has been installed. If there is no liquid, the level switch remains in a vertical position, suspended by the electrical cable. When the level rises, the microswitch of the float will tilt and close or break the circuit.

They open or close the pumps’ power supply either directly or through a relay. The switching differential between the low and high level is determined by the distance between the float and the fixation point of the electrical cable. If the float is equipped with an adjustable ballast on cable, then the switching differential is determined by the distance between the ballast and the float (maximum recommended: 1.50m.)

Thanks to the diverse technical specifications of our level switches, you should find the ideal float switch for your single phase pumps and others.

Several types of cable hangers and ballasts are available. For more information, see our Accessories section.
Page 1 of 1:    6 Items 

AT120  Float Level Switch

AT120 Float Level Switch

  • Operation mode Omnidirectional
  • Switching angle +/- 120º
  • Maximum pressure3,5 bars
  • Allowed fluid density 0,70 to 1,15
  • Cut-out power 20 (8) A (20A resistive – 8A inductive)
  • Cable type Neoprene or HR HY (High Resistance)
Download a datasheet for the AT120 Float Switch Switch here.. Download a datasheet for the AT120 Float Level Switch

AT120 HR HY Heavy Duty Float Level Switch

AT120 HR HY Heavy Duty Float Level Switch

  • Operation mode Omnidirectional
  • Switching angle +/- 120º
  • Maximum pressure 4 bar
  • Allowed fluid density 0.80 to 1.10
  • Cut-out power 20 (8) A (20A resistive – 8A inductive)
  • Float construction Double HR HY (High Resistance) housing
  • Cable type Neoprene or HR HY (High Resistance)
Download a datasheet for the AT120 Float Switch Switch here.. Download a datasheet for the AT120 HR HY Heavy Duty Float Level Switch

ATS 165 EP Float Level Switch

ATS 165 EP Float Level Switch

  • Operation mode Omnidirectional
  • Switching angle+/- 165º
  • Maximum pressure 3,5 bars
  • Allowed fluid density 0,70 to 1,15
  • Cut-out power20 (8) A (20A resistive – 8A inductive)
  • Cable type Sanitary EPDM
  • CertificationACS (Sanitary Conformity Certificate) according to the AFNOR XP P41-250 (1-2-3) standard
Download a datasheet for the ATS165 EP Float Level Switch here.. Download a datasheet for the ATS 165 EP Float Level Switch

ATS 165 Float Level Switch

ATS 165 Float Level Switch

  • Operation mode Omnidirectional
  • Switching angle+/- 165º
  • Maximum pressure 3,5 bars
  • Allowed fluid density 0,70 to 1,10
  • Cut-out power20 (8) A (20A resistive – 8A inductive)
  • Cable type Neoprene or HR HY (High Resistance)
Download a datasheet for the ATS165 Float Level Switch here.. Download a datasheet for the ATS 165 Float Level Switch

BIP STOP Float Switch

BIP STOP Float Switch

  • Operation mode - Omnidirectional
  • Switching angle +/- 110º
  • Maximum pressure 3,5 bars
  • Allowed fluid density 0,70 to 1,15
  • Cut-out power 20 (8) A (20A resistive – 8A inductive)
  • Cable type Neoprene or HR HY (High Resistance)
Download a datasheet for the BIP STOP Float Switch here.. Download a datasheet for the BIP STOP Float Switch

SOBA Ex 10-08 Float Level Regulator

SOBA Ex 10-08 Float Level Regulator

  • Designed for working in explosive gas areas
  • Maximum pressure - 4Bar
  • IP 6X protection
  • Maximum temperature T6 and Ta: from -20ºC to +80ºC / idem
  • 24 VAC/VDC - 10 mA or 12 VAC/VDC - 100 mA
Download a datasheet for the soliba Float Level Regulator here.. Download a datasheet for the soliba atex certified floa level regulator

Page 1 of 1:    6 Items 
Search
Shop by Brand
Currency Selector
Sterling  US Dollar  Euro