DLS-27 Capacitive Level Sensor

DLS-27 Capacitive Level Sensor
Zoom  Zoom
  • Direct mounting into various containers, vessels, silos, tanks, filling inlets, reservoirs, etc.
  • Outputs NPN, PNP, NAMUR (for explosive areas)
  • Sensitivity and hysteresis fluently adjustable
  • Supply voltage 7 ... 36V DC (NAMUR 8 ... 12V DC)
  • Material of housing and electrode from stainless steel
  • Process coupling - thread M27x2; M30x1.5; G3/4“ or Triclamp
  • LED state indication
Download a datasheet for the CLS Capacitive Level Sensor here.. Download a datasheet for the DLS 27 Capacitive Level Sensor

Brand:  Dinel



Get a Quote Now or Discuss Your Requirements.


Call +44 (0)1892 664499



DLS 27 Capacitive Level Sensor:
  • Direct mounting into various containers, vessels, silos, tanks, filling inlets, reservoirs, etc.
  • Outputs NPN, PNP, NAMUR (for explosive areas)
  • Sensitivity and hysteresis fluently adjustable
  • Supply voltage 7 ... 36V DC (NAMUR 8 ... 12V DC)
  • Material of housing and electrode from stainless steel
  • Process coupling - thread M27x2; M30x1.5; G3/4“ or Triclamp
  • LED state indication
Product Variants

DLS-27_-10

Uncoated short bar electrode for sensing non-adhesive bulk-solid (powder) materials (sand, sugar) and electrically non-conductive liquids (oils, diesel, petrol), horizontal mounting. Electrode length 50 mm or 100 mm.

DLS-27_-11

Fully coated short bar electrode for sensing electrically conductive liquids (water). Assembly into a side wall of vessel or into a pipe. Electrode length 30 mm.

DLS-27_-20

Semi-coated rod electrode for sensing light-bulk solid or powder materials (plastic granulates, cement) and non-conductive liquids (plant oils), horizontal, slant or vertical mounting. Electrode length from 0.1 m to 1 m.

DLS-27_-21

Fully (FEP) coated rod electrode for sensing electrically conductive liquids (water solutions, water), adhesive and aggressive materials, horizontal or vertical mounting. Electrode length from 0.1 m to 1 m.

DLS-27_-22

NEWIsolated rod electrode for level measurement of water and other electrically conductive liquids in the food, pharmaceutical and chemical industries. Isolation of electrode from PFA material with higher resistance to penetration (diffusion) of gases or vapors. Suitable for high temperature applications (hot steam), volatile corrosive liquids, etc. Horizontal or vertical mounting. Maximum electrode length up to 1 m.

DLS-27_-30

Dismountable rod uncoated electrode for sensing bulk-solid (powder) materials and conductive or non-conductive liquids. Mounting from the top (vertically) or slant from the side. Electrode length from 0.1 m to 3 m.

DLS-27_-31

Fully coated rod electrode for sensing aggressive electrically conductive liquids (water, solutions of chemicals), vertical mounting. Electrode length from 0.1 m to 2 m.

DLS-27_-40

Uncoated stainless steel rope electrode and weight for general purpose in deeper silos (bulk-solid and powder materials sensing - sand, gravel, cement) or hoppers (liquids sensing), vertical mounting. Electrode length from 1 m to 6 m.

DLS-27N

Performance for non-explosive areas.

DLS-27Xd

Performance for use in flammable dust atmospheres.

DLS-27Xi

Explosion proof - intrinsically safe for hazardous (explosive) areas

DLS-27XiM

Explosion proof - intrinsically safe for use in mines with methane or flammable dust presence danger.

DLS-27NT, DLS-27XiT

High temperature variants – up to 200°C.
Search
Shop by Brand
Currency Selector
Sterling  US Dollar  Euro