CLM-36 Capacitive Level Sensor

CLM-36 Capacitive Level Sensor
Zoom  Zoom
  • Direct mounting into containers, silos, basins, vessels, reservoirs, etc.
  • Easy and quick connecting by connector
  • Continuous adjustment of initial capacity
  • Current (4 ... 20 mA) or voltage (0 ... 10 V) output
  • Removable electronic module
  • Material of housing and rod electrodes from stainless steel
Download a datasheet for the CLM Capacitive Level Sensor here.. Download a datasheet for the CLM 36 Capacitive Level Sensor

Brand:  Dinel



Get a Quote Now or Discuss Your Requirements.


Call +44 (0)1892 664499



CLM-36 Capacitive Level Sensor:
  • Direct mounting into containers, silos, basins, vessels, reservoirs, etc.
  • Easy and quick connecting by connector
  • Continuous adjustment of initial capacity
  • Current (4 ... 20 mA) or voltage (0 ... 10 V) output
  • Removable electronic module
  • Material of housing and rod electrodes from stainless steel
Product Variants

CLM-36_-10

With uncoated rod electrode - for level measurement of non-conductive liquids (oils, diesel, petrol) and powder or bulk-solid materials (flour, sand, cement, plastic granulates, etc.). Max. length 5 m.

CLM-36_-11 NEW

Isolated rod electrode for level measurement of water and other electrically conductive liquids in the food, pharmaceutical and chemical industries. Isolation of electrode from PFA material with higher resistance to penetration (diffusion) of gases or vapors. Suitable for high temperature applications (hot steam), volatile corrosive liquids, etc. Maximum electrode length up to 3 m.

CLM-36_-12

With fully FEP-coated rod electrode - for level measurement of water and electrically conductive liquids incl. wasted liquids in metallic vessels, concrete sumps, reservoirs, etc., better behaviour against aggressive media, lower adhesion to some complicated media, chemical resistance, max. length 3 m.

CLM-36_-20

With uncoated rod electrode and reference tube - for accurate level measurement of clean non-conductive liquids (oils, diesel, petrol). By means of reference tube the output signal does not depend on the dimensions and shapes of a vessel. Impossible to use for waste and high viscosity liquids and bulk solid materials.

CLM-36_-22

With fully FEP coated rod electrode and reference tube - for accurate level measurement of conductive liquids. Main use is for measurement in plastic vessels or tanks. Impossible to use for waste and high viscosity liquids and bulk-solid materials.

CLM-36_-30

With uncoated stainless steel rope electrode and uncoated weight – for level measurement of bulk-solid materials (grains, sand, flour, cement, etc.). Max. electrode length 20m.

CLM-36_-31

As the type 30, in addition dynamic anchorage, for higher silos - up to 20 m.

CLM-36_-32

With fully coated rope electrode (rope insulation FEP, weight insulation PTFE), for level measurement of electrically conductive and non-conductive liquids - lengths up to 20 m.

CLM-36_-40

With 2 coated electrodes (rode insulation FEP, head fully PTFE), for level measurement of aggressive liquids.

CLM-36N

Performance for non-explosive areas.

CLM-36Xi

Performance for explosive areas (combustible dusts, gases or vapours).

CLM-36NT, XiT

High temperature performance, for max. temperatures in coupling place +200°C.

CLM-36_-_-M

Thread process coupling M36x2.

CLM-36_-_-G

Thread process coupling G1.

CLM-36_-_-Cl

Sanitary Triclamp process coupling.
Search
Shop by Brand
Currency Selector
Sterling  US Dollar  Euro