Automatic Control Valves

Page 1 of 1:    9 Items 

Balem 131-010 Float Control Valve - Modulating (Constant Level)

Balem 131-010 Float Control Valve - Modulating (Constant Level)

  • Model 131-010 consists of Basic Valve (BALEM 130) and Buoyancy pilot valve.
  • controls outflow in a water supply tank and/or in a reservoir to maintain constant water level.
  • Completely automatic operation without Electric Power Source
  • Easy Installation and Maintenanc
Download a datasheet on the Balem 131-010 Control Valve here.. Download a datasheet for the Balem 131-010 Float Control Valve - Modulating (Constant Level)

Balem 131-020 Float Control Valve - ON/OFF (2x Constant Levels)

Balem 131-020 Float Control Valve - ON/OFF (2x Constant Levels)

  • Can control water levels from 300mm up to 1200mm in a storage tank
  • Mechanical on-off High & Low level Control
  • Completely automatic operation without Electric Power Source
  • Easy Installation and Maintenance
  • Watch a video demonstration here
Download a datasheet on the 131-020 Float Control Valve here.. Download a datasheet for the Balem 131-020 Float Control Valve - ON/OFF (2x Constant Levels)

Balem 132-020 Pressure Reducing & Check Valve

Balem 132-020 Pressure Reducing & Check Valve

  • Maintains constant pre-set low pressure
  • Accurate Pressure Control
  • Sensitive Pressure Control supported by Diaphragm
  • Backflow Prevention
Download a datasheet on the Pressure Red. & Check Valve here.. Download a datasheet for the Balem 132-020 Pressure Reducing & Check Valve

Balem 132-030 Pressure Reducing & Sustaining Valve

Balem 132-030 Pressure Reducing & Sustaining Valve

  • Maintains constant downstream pressure
  • Accurate Response to Slight Pressure Changes
  • Completely automatic operation without Electric Power Source
  • Drip Tight, Safe Hydraulic Control
  • WATCH A VIDEO DEMONSTRATION
Download a datasheet on the Pressure Reduc. & sustaining valve here.. Download a datasheet for the Balem 132-030 Pressure Reducing & Sustaining Valve

Balem 138-020 Solenoid Control & Emergency Cut-Off Valve

Balem 138-020 Solenoid Control & Emergency Cut-Off Valve

Model 138-020 consists of Basic Valve(BALEM 130), Solenoid On-Off Pilot Valve and the limit switch. The valve can control solenoid pilot valve according to an electrical signal so valve opens and closes rapidly.The valve has dual Normal Open type solenoid valves and dual Normal Close type solenoid. When power failure or leakage occurs the valve senses the flow and closes promptly for preventing the damage in pump filed or automatic control system.

Download a datasheet on the Balem 138-020 Solenoid Control Valve.. Download a datasheet for the Balem 138-020 Solenoid Control & Emergency Cut-Off Valve

Balem 139-010 Booster Pump Control Valve

Balem 139-010 Booster Pump Control Valve


Model 139-010 is designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. If power failure occurs, the valve immediately closes preventing return flow regardless of control mode.
  • Built-in Check action
  • Valve uses line pressure for operation
  • Opening and closing rates can be adjusted seperately
  • WATCH A VIDEO DEMONSTRATION
Download a datasheet on the 139-010 Pump Control Valve here.. Download a datasheet for the Balem 139-010 Booster Pump Control Valve

Balem 139-020 Deep Well - Pump Control Valve

Balem 139-020 Deep Well - Pump Control Valve

Model 139-020 consists of Basic Valve(BALEM 130), Solenoid Pilot Valve and Limit Switch. It is installed at outline of Deep Well Pump to protect pipelines from surges caused by the starting and stopping of pumps. With the pump off, the valve is wide open. When the pump is started, the valve begins to close slowly, discharging air and the initial rush of sand and water from the pump column to atmosphere.

Download a datasheet on the 139-020 Pump Control Valve here.. Download a datasheet for the Balem 139-020 Deep Well - Pump Control Valve

Balem130-ID-01 Valve Position Indicator

Balem130-ID-01 Valve Position Indicator

Model ID-01 is connected to the basic valve (BALEM 130) and easy to adjust and read the condition of opening and closing. An indication mark shows the percentage.

  • Positive Visual Indicator
  • Easy Adjustments
  • Easy Maintenance and Cleaning
  • Indication mark shows the percentage
Download a datasheet of the 130-ID-01 Valve Position Indicator here.. Download a datasheet for the Balem130-ID-01 Valve Position Indicator

Balem138-010 Solenoid Control Valve

Balem138-010 Solenoid Control Valve

Model 138-010 consists of Basic Valve (BALEM 130) and Solenoid on-off Pilot Valve. It opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve, as a solenoid pilot valve, can be provided two different types.The standard basic valve which normally closed(basic valve opens as solenoid operates), and valve made to order which normally opened (Basic valve closes as solenoid operates

Download a datasheet on the 138-010 Solenoid Control Valve here.. Download a datasheet for the Balem138-010 Solenoid Control Valve

Page 1 of 1:    9 Items 
Search
Shop by Brand